Installing The Multi-Functional Conference Table Stand - Huawei Telepresence TP3106 Installation Manual

HUAWEI TP3106&TP3118S&TP3118 Telepresence
Installation Guide

9.2 Installing the Multi-Functional Conference Table Stand

Context
The method for installing the multi-functional conference table stand for the TP3118S is similar
to that for the TP3118. The following procedure uses the TP3118 as an example.
During the installation, you may move the table legs slightly to align the installation holes. Do
not fully tighten the screws for any parts except the front and rear connecting rods until the
installation is completed.
Procedure
Step 1 Stretch a measuring tape from the center of front-row center tabletop segment edge vertically
down to the floor.
Step 2 Using the measuring tape, draw a line parallel to (by visual inspection) the center tabletop
segment edge from the point of intersection.
Step 3 Draw another 1542.36 mm line perpendicular to the center tabletop segment edge. Place table
leg 4 secured to its base along the line, as shown in
Figure 9-7 Installing table leg 4
Step 4 Mount steel plate 4 on table leg 4, as shown in
Issue 07 (2013-11-08)
CAUTION
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 Installing the Second Row of the Multi-Functional
Figure 9-7.
Figure 9-8.
Conference Table
75