Huawei Telepresence TP3106 Installation Manual page 39

HUAWEI TP3106&TP3118S&TP3118 Telepresence
Installation Guide
Figure 7-2 Mounting the HD display
1.
2.
3.
Step 3 Tighten the four support legs of the center rack to fix the center rack.
Step 4 Adjust the level and pitch angle of the HD display.
l Fine-tune the pitch angle of the center HD display to 90 degrees, as shown in
l Use a measuring tape to measure the distance between the HD display base and the floor, as
l Use a spirit level to check the center HD display along axes X and Y, as shown in
Issue 07 (2013-11-08)
Lift an HD display and place it into the HD display base.
Hang the HD display on the center rack. Arrange another person to check the hole alignment
at the rear of HD display.
Tighten the screws using an H6 Allen wrench.
shown in Figure 6-4.
Fine-tune the HD display base, if required, to ensure that the distance is 630 mm, as shown
in Figure 6-5.
7-3.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Installing the HD Displays
Figure 7-2.
Figure
34