Conference Control - Huawei TE30 Product Overview

TE30 Videoconferencing Endpoint
Product Overview
l
l
l
Local Site Placing Calls to Other Sites
If two sites are having a P2P call and one of the sites calls another site (or multiple sites), that
site can perform one of the following operations:
l
l
l

5.4 Conference Control

Conference control enables a more flexible and functional conference system. Conference
control can be performed by the chair or by the non-chair site. The chair site can perform a
diverse range of practical conference control operations, while the non-chair site can perform
some simple conference control operations.
The chair site can perform conference control operations on the touch panel UI (see
5-3), remote control UI
Issue 03 (2018-06-30)
– Call Hold: The site in an active call can be placed on hold or released, and the site
on hold can be resumed off hold or released. In call hold state, the local and remote
sites cannot hear or video each other. They can do this only after the call hold
operation is canceled.
– Merge: Place the original P2P call on hold, and set up a call with another site or to
several other sites, and turn the P2P call into a multipoint conference.
Answer&Release: Answer calls from other sites and release the original P2P call.
Ignore: Ignore calls from other sites, close the incoming call notification dialog box, and
continue the original P2P call.
Reject: Reject calls from other sites and continue the original P2P call.
Hold&Call: Place the original P2P call on hold and place a call to another site or to
several other sites.
Then you can place calls on hold or merge calls as follows:
– Call Hold: The site in an active call can be placed on hold or released, and the site
on hold can be resumed off hold or released. In call hold state, the local and remote
sites cannot hear or video each other. They can do this only after the call hold
operation is canceled.
– Merge: Place the original P2P call on hold, and set up a call with another site or to
several other sites, and turn the P2P call into a multipoint conference.
Add: Add sites to the original P2P call to turn it into a multipoint conference.
Cancel: Cancel calling another site or several other sites and continue the original P2P
call.
NOTE
For the endpoint that joins a conference initiated by the Videxio platform, conference control functions
are unavailable.
(Figure
Copyright © Huawei Technologies Co., Ltd.
5-4), and web interface (see
5 Functions and Features
Figure 5-5).
Figure
16