Installation On The Huawei Mediapad; Configuration Wizard; Setting Time And Time Zone Parameters - Huawei RP100 Commissioning Manual

HUAWEI RP100&RP200 Room Presence
Commissioning Guide

5.2.2 Installation on the Huawei MediaPad

See the HUAWEI RP100&RP200 V100R001C50 Upgrade Guide.docx.

5.3 Configuration Wizard

5.3.1 Setting Time and Time Zone Parameters

Figure 5-6 Setting time and time zone parameters
Table 5-3 Time and time zone parameters
Parameter
Location
Time zone
Daylight saving time
Issue 01 (2015-02-12)
NOTE
l This section is applicable when the system comes with a touch panel. For details about how to configure
the system with a remote control, see chapter 6.
l After you install and log in to the Huawei Telepresence application, a configuration wizard screen is
displayed. Follow the steps in this section to complete the configuration.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Value
China
(GMT+08:00) Beijing,
Chongqing, Hongkong..
Off
5 TE40 Wi-Fi and Touch Panel Settings
Remarks
This parameter is mandatory.
Set this parameter based on the
site requirements.
This parameter is mandatory.
Set this parameter based on the
site requirements.
This parameter is available
when the selected location
supports NTP. Set it based on the
actual condition.
60