Initial Configuration; Setting Temperature And Humidity Values And Enabling T/H Sensors - Huawei NetCol8000-E220 User Manual

NetCol8000-E220 Modular Indirect Evaporative Cooling
System
User Manual
No.
7
8
9
10
11
12

4.4 Initial Configuration



4.4.1 Setting Temperature and Humidity Values and Enabling
T/H Sensors
Prerequisites


Issue 02 (2019-10-10)
Items
The current minor alarm
and their quantity
The current warning alarm
and their quantity
The status bar
The alarm bar
Login button / Logout
button
Teamwork control button
When configuring the temperature and humidity parameters, do not place the cursor
between the decimal point and the following digit of the value. Otherwise, the decimal
point cannot be deleted, and the parameter value fails to be configured.
When no air damper is configured, do not enable the air damper function. Otherwise, the
air damper communication failure alarm will be generated, causing the device to work
abnormally.
The T/H sensors outside the cabinet need to be enabled when they are installed,
otherwise, skip Step 2.
If you need to enable a humidity and temperature sensor, log in as the admin user.
Copyright © Huawei Technologies Co., Ltd.
4 Power-on and Commissioning
Note
refers to the current major alarm and their
quantity.
refers to the current warning alarm and their
quantity.
N/A
You can tap
to enter the active alarm screen that displays all
active alarms.
indicates that you have not logged in
to the system, and can tap the icon to log in.
indicates that you have logged in to
the system as admin or operator user, and can tap the
icon to log out.
indicates that there is no teamwork control at
present. indicates that there is teamwork
control without alarms at present.
that there is teamwork control with alarms at present.
in the alarm bar
indicates
76