Home Screen - Huawei NetCol8000-E220 User Manual

NetCol8000-E220 Modular Indirect Evaporative Cooling
System
User Manual
Menu
----End
Follow-up Procedure
After powering on, the compressor starts preheating, and the system generates an alarm
indicating that the compressor is preheating (for 12 hours). Do not start the smart cooling
product before the preheating ends.
If you need to query the remaining preheating time, choose Running > Device Details >
Compressor on the home screen.

4.3 Home Screen

You can tap the menu items, buttons, or icons on the screen to enter related screens or perform
operations, such as Running, Alarms and Settings. The controller main screen is shown in
Figure
User interfaces displayed in this document are for reference only.
Issue 02 (2019-10-10)
Parameter
Humidity
setpoint
Cold aisle
sensor 1–5
Hot aisle
sensor 1–5
4-3.
Copyright © Huawei Technologies Co., Ltd.
4 Power-on and Commissioning
Setting Guide
this type are set, the device
runs based on the settings.
After the Temperature and
humidity control type and
the humidity value under
this type are set, the device
runs based on the settings.
If a temperature and
humidity sensor outside the
cabinet is installed, set the
temperature and humidity
sensor in the corresponding
position to Enable.
Default Value
50% RH
Disable
Disable
74