NetCol8000-E220 Modular Indirect Evaporative Cooling
System
User Manual
Name
3.12.4.2 Connecting the Teamwork Network Cable
Smart cooling products in a teamwork group must be of the same model.
CAN teamwork networking (CAN Protocol)
A maximum of 32 smart cooling products can be teamworked. If CAN networking is required
onsite, set Teamwork CAN resistor enable on Teamwork Settings of the first and last smart
cooling products to Yes.
Step 1 Prepare the 8pin standard network cable, the cable pin sequence requirements are shown
below.
Figure 3-41 CAN_IN/CAN_OUT network cable pin sequence
Step 2 Connect the CAN_OUT port of each smart cooling product to the CAN_IN port of the
following smart cooling product using a CAN network cable, as shown in
Figure 3-42 Connecting the CAN teamwork cable
Issue 02 (2019-10-10)
Color
Copyright © Huawei Technologies Co., Ltd.
Status
Description
generated.
Off
No alarm, warning alarm,
or minor alarm is
generated.
3 Installation Guide
Figure
3-42.
56