Power-On And Commissioning; Preparing For Power-On; Power-On - Huawei NetCol8000-E220 User Manual

NetCol8000-E220 Modular Indirect Evaporative Cooling
System
User Manual

4.1 Preparing for Power-On

Procedure
Step 1 Check that all switches except QF1/QF2 are closed in the NetCol8000.
Step 2 Verify that the input voltage meets the requirement.
Ensure that there is no reverse or open phase for the input power cable of the smart cooling
product. Otherwise, the smart cooling product may be damaged beyond repair.
Step 3 Verify that the L1, L2, L3, N, and PE wires are connected to the device in correct phase
sequence.
Step 4 If teamwork networking is required, verify that the teamwork cable is correctly connected.
Step 5 If the cabinet is connected to the temperature and humidity sensor, check that the cable
connection and DIP switch settings are correct.
----End

4.2 Power-On

Procedure
Step 1 Turn on the upstream power input switch of the device. The LCD lights up.
Step 2 After the system is powered on for the first time, the Quick Settings screen is displayed. Log
in as the admin user, as shown in
Issue 02 (2019-10-10)
4

Power-on and Commissioning

Copyright © Huawei Technologies Co., Ltd.
Figure 4-1.
4 Power-on and Commissioning
68