Setting Up The Project; Creating A Directory - Xilinx LogiCORE IP Spartan-6 Getting Started Manual

Chapter 3: Running the Wizard

Setting Up the Project

Before generating the example design, set up the project as shown in
and

Creating a Directory

To set up the example project, first create a directory using the following steps:
1.
2.
3.
4.
5.
X-Ref Target - Figure 3-2
16
Setting the Project Options.
Change directory to the desired location. This example uses the following location and
directory name:
/Projects/pcie_example
Start the CORE Generator™ tool.
For help starting and using the CORE Generator tool, see CORE Generator Help,
®
available in ISE software documentation.
Choose File → New Project
Optionally change the name of the .cgp file
Click Save.
Figure 3-2: Starting a New Project
www.xilinx.com
(Figure 3-2).
Spartan-6 FPGA GTP Transceiver Wizard v1.8
Creating a Directory
UG546 (v1.8) December 14, 2010