Installing The Wizard; Verifying Your Installation - Xilinx LogiCORE IP Spartan-6 Getting Started Manual

Chapter 2: Installation and Licensing

Installing the Wizard

The Spartan-6 FPGA GTP Transceiver Wizard is included with the ISE 12.4 software. See
ISE CORE Generator IP Updates - Installation Instructions
12.4.

Verifying Your Installation

Use the following procedure to verify that you have successfully installed the Spartan-6
FPGA GTP Transceiver Wizard in the CORE Generator tool.
1.
2.
X-Ref Target - Figure 2-1
3.
4.
14
Start the CORE Generator tool.
The IP core functional categories appear at the left side of the window, as shown in
Figure 2-1.
Figure 2-1: CORE Generator Window
Click to expand or collapse the view of individual functional categories, or click the
View by Name tab at the top of the list to see an alphabetical list of all cores in all
categories.
Determine if the installation was successful by verifying that Spartan-6 FPGA GTP
Transceiver Wizard 1.8 appears at the following location in the Functional Categories
list:
/FPGA Features and Design/IO Interfaces
www.xilinx.com
for details on the installation of ISE
Spartan-6 FPGA GTP Transceiver Wizard v1.8
UG546 (v1.8) December 14, 2010