Security Configuration; Import Of Application From 800Xa; Export Of Application From 800Xa - ABB IndustrialIT Compact HMI 800 Getting Started

Section 4 Engineering
If you select the Log Selected Audit Event Classes check box, you will be
allowed to choose which audit event message classes to include.
3. Click Apply.
Re-authentication is required to apply changes in the Audit Trail Configuration if
Advanced Access Control is activated.

Security Configuration

The default configuration contains a security setting valid for all objects in the
system. This default configuration can be found at path:
"[Admin Structure]Administrative Objects/Inventory Object/Domain/<System
Name>:Security Definition".
The default configuration gives the operator Read and Operate permission.
In some application this approach is not enough. For example could different groups
of operators have different access rights to application areas. This can be achieved
by adding Security Definition aspects with structure range on top of the areas in the
Functional Structure.
Individual objects can also have extended protection by adding a Security
Definition aspect with object range directly on the object.
For more information how to configure security, see the Industrial
Administration and Security instruction.

Import of Application from 800xA

Export of application from 800xA

To export the controller communication definition part of a PLC Connect based
application in 800xA do the following:
1. Open the Plant Explorer in the 800xA system in the Control Structure.
3BSE040587R4401
Security Configuration
IT
Base System,
85