ABB IndustrialIT Compact HMI 800 Getting Started page 70

Adding Process Displays
10. After selecting the object in the select object dialog the object appears in the
Element browser.
11. To add a graphical element to the graphics select the object in the element
browser and then select the element in the right column and click the Add
Element button.
12. In addition to display element the graphics normally contain static information.
several statical graphical primitives exits in the toolbar to the left in the
Graphics builder.
13. The Compact HMI 800 also contains a set of graphical elements named
Symbol Factory these are made available in the graphics builder by selecting
the Symbol factory tab in the left toolbar and then right-clicking the area and
select components.
14. Now Scroll down to the entry "Symbol Factory Controls" check the check
box and click Apply, then close the window with Close.
15. These components can Now be used by clicking on the pump symbol and then
placing it in the graphics.
16. After placing the symbol the contents can be changed by right-clicking the
symbol and select Properties
17. Now the whole library of symbols are displayed, just pick a suitable symbol
and press OK.
18. When finished building the graphics select File > Deploy to make the graphics
ready to be used.
See also the Industrial
70
IT
Base Engineering, Graphics instruction.
Section 4 Engineering
3BSE040587R4401