Start Up - ABB IndustrialIT Compact HMI 800 Getting Started

Start Up

The Windows Users shown in the
800 system. They are members of user groups as shown in the
manner the users have inherited correct configuration profile.
User Groups
Windows is configured in such manner that the Welcome screen is presented after
the boot. The users presented on the Welcome screen are the users that are
configured for this system, but not the only users in the system. Other users exist,
but are hidden, and are only to be used in special system administration tasks.
Default passwords for the Compact HMI 800 users are the same as their user names.
Start Up
After installing the hardware, the system is started as follows:
• Power up network switches and other communication equipment.
• Power up the server node.
• Power up the clients.
• Power up PLCs and other equipment.
When the nodes have started, a welcome screen asks the user to log in. Normally
you start to log in as an AppEng (Application Engineer), to start the engineering
work of the system.
32
Table 3
Table 3. Windows User Groups
Operator
Everyone
Operators Operators
Application Engineers
System Engineers
Section 3 Installation
below are created on the Compact HMI
AppEng
Everyone
Application Engineers
System Engineers
Table 3. In that
SysAdmin
Everyone
Operators
Administrators
3BSE040587R4401