ABB IndustrialIT Compact HMI 800 Getting Started page 168

Table of Contents

Creating a Valve Element

Create a Graphic Element aspect for the Valve Object Type and name it e.g.

Valve Element. See

Select the created Graphic Element aspect and click Edit. The Graphics

Builder is started.

Add the graphic library PLC Subelements to the toolbox.

Select the PLC Subelements tab, and then create a Valve2Way element.

Create an AlarmState, a WarningLevel and a ManIndication element by

double-clicking and place them next to the Valve Element.

Figure 115. Creating a Valve Element

Add from the Library of Standard Symbols the OperatorMessage Icon and

place it in the lower left corner of the Valve Element. You need to set the

Stretch Property to True.

Select the Valve Element. Via the Properties window, connect the

AnswerOpenedRef property to the process signal corresponding to whether

the valve is opened or not.

Connect the AnswerClosedRef property to the process signal corresponding to

whether the valve is closed or not. If desired, you need only connect one of the

process signals.

168

Figure

115.

ManIndicator

OperatorMessage

Section 8 PLC Connect Graphic Elements

WarningLevel

AlarmState

3BSE040587R4401

Table of Contents

Show Quick Links

Table of Contents