ABB IndustrialIT Compact HMI 800 Getting Started page 107

Section 5 Operation
Below an example of a Process Alarm List.
Figure 65. Process Alarm List
Right-click on an alarm line to bring up the context menu. From the context menu
you can perform some actions on the alarm line, or access any aspect of the object in
the alarm state.
You can acknowledge alarms for an object in the following ways:
• By clicking on the Ack State box for the alarm in the list.
• By right-clicking on an alarm line and selecting Acknowledge (all alarms for
that object will be acknowledged) or Acknowledge Selected (only the selected
object will be acknowledged) from the context menu.
• By selecting one or several alarms in the alarm list and clicking the
Acknowledge button (green check mark)
• By clicking on the alarm status button in a faceplate
3BSE040587R4401
Alarm and Event Usage
107