Faceplate Usage - ABB IndustrialIT Compact HMI 800 Getting Started

Faceplate Usage

• Display 2: Contains details for the tank 2.
• Display 3: Contains details for pump 2 in the tank 2 display.
1. At start up, Display 1 is shown.
2. A few alternatives are available to go to display 2 from display 1:
a.
b.
c.
3. To go to Display 3, alternatively:
a.
b.
4. To go back to Display 1, alternatively:
a.
b.
c.
Faceplate Usage
A Faceplate is a process dialog for supervision and control.
The faceplates can e.g. be opened in the following ways:
• From a process display by left-clicking on the process object (display element).
• By entering (or selecting) the object name in the Object Shortcut tool.
100
Left click on tank 1 (tank 1 is displayed as a graphic element and the
Display 2 is the default aspect of tank 2).
Press F6 functional key (F6 configured as a key shortcut).
Left click on the Display Link in Display 1 (the Display Link is referring
to Display 2).
Press F7 functional key (F7 configured as a key shortcut).
Left click on the Display Link in Display 2.
Press F5 functional key (F5 configured as a key shortcut).
Click on previous Display in the Display tool bar.
Use the Display history tool in the display bar.
Section 5 Operation
3BSE040587R4401