Table of Contents
Advertisement
Section 4 Engineering
Adding Alarm and Event list for a plant Area
The functional structure can now be used as a base for sorting alarms according to
the functional structure of the plant. To configure an Alarm and event list that shows
alarms for a specific part of the plant use the following steps.
1.
Select an object at the level in the functional structure for which an Alarm and
Event list is required that includes alarms from all children of the object.
2.
Right-click and select Add Aspect.
3.
Select "Alarm and Event list" in the list then click Create.
4.
The list is now ready to use.
For further information see Industrial
Configuration.
Adding Navigation
To add navigation functionality between displays there are several methods
available. Below the four most common ways to navigate are listed:
•
Shortcuts make it easy to navigate to the most important and/or most frequently
used aspects of different aspect objects. You can find different shortcuts in the
Application Bar.
•
By clicking the Aspect Menu icon in the Tool Bar the Aspect Menu will be
presented. From the Aspect Menu you can navigate to different displays by
clicking on your Aspect Favorites.
•
From the context menu you can select an aspect, action or a referenced display
for the object or aspect. The content of a context menu differs depending on
which object or aspect you have selected.
•
You can move back to the previous display by clicking on the Back to Previous
Display button. If the button is disabled, it is not possible to go backward.
The additions of shortcuts are described in the next chapter.
For more information see Industrial
Configuration.
3BSE040587R4401
Adding Alarm and Event list for a plant Area
IT
Base System, Operator Workplace
IT
Base System, Operator Workplace
77
Hide quick links:
Advertisement
Table of Contents
