Creating A Pump Element - ABB IndustrialIT Compact HMI 800 Getting Started

Section 8 PLC Connect Graphic Elements

Creating a Pump Element

1. In Plant Explorer, select the Object Type Structure, and then the Pump
object type. See
2. Create an AlarmStatus aspect for the object type. The AlarmStatus aspect is
required for alarm information to be propagated to the object type. Don not
rename this aspect!
3. Create a Graphic Element aspect for the object type.
4. Select the created Graphic Element aspect and click Edit. The Graphics
Builder is started. Add the graphic library PLC Subelements to the toolbox.
5. Select the PLC Subelements tab, and then create a PumpSimple element. See
Figure
6. Create an AlarmState, WarningLevel and a ManIndication element by
double-clicking and place them next to the valve element.
If the Property for the AppError is set to Bad, it is easier to place the
Indicators in suitable positions.
Don not forget to set back the AppError too Good before you Deploy the
Graphical Element.
Figure 119. Creating a Pump Element
3BSE040587R4401
Figure 119.
119.
Creating a Pump Element
171