How To Do A Configuration For A Third Party Ae-Opc Server - ABB IndustrialIT Compact HMI 800 Getting Started

Connection to Third Party Alarm & Event OPC Server

How to do a configuration for a third party AE-OPC Server

The OPC Server is installed on the Compact HMI 800 node.
Create a Service Group for the Event Collector.
Create a Service Provider for the created Service Group.
Figure 9. AE OPC Service Group.
Do the configuration of the Service Provider and of the AE-OPC Server.
Select the current PLC_C node in the Service Provider Definition Aspect and select
the Prog_ID for the current OPC A&E Server in the Service Group Definition
Aspect.
36
Section 3 Installation
3BSE040587R4401