The Alarmstate Object - ABB IndustrialIT Compact HMI 800 Getting Started

Section 8 PLC Connect Graphic Elements
WarningLevel is used to indicate the warning conditions of an object, e.g.
communication failure. For the behavior of the element see
Object
AlarmWarning Combo is a status icon that can show both alarm and/or warning
information for a process object. The icon can show the summarized alarm status
and/or summarized warning level for a process object. For the behavior of this
element see
The Tank object is a complete tank with a Bar Graph.
The BinIndication is used to indicate the status of a Boolean signal.

The AlarmState Object

AlarmState is a status icon that can show the summarized alarm status for a process
object. It will show the top priority alarm for the signals in a process object. When
cleared the next alarm in priority order will be displayed. The priority is used when
a summarized alarm status is shown for the signals in a process object. A single
process signal can only be in one state at a time. See
Figure 102. AlarmState Appearance
3BSE040587R4401
on page 156.
The AlarmWarning Combo Object
Library of PLC Subelements
The WarningLevel
on page 156.
Figure 102.
155