ABB ACSM1 Firmware Manual page 100

100
12.13 DI INVERT MASK
Inverts status of digital inputs as reported by
inverts the status of DI3 in the signal.
0b000000...0b111111
12.14 DIO2 F MAX
Defines the maximum input frequency for DIO2 when
The frequency signal connected to DIO2 is scaled into an internal signal
parameters
2.10 DIO2 FREQ IN
12.16
12.17
3...32768 Hz
12.15 DIO2 F MIN
Defines the minimum input frequency for DIO2 when
parameter
3...32768 Hz
12.16 DIO2 F MAX SCALE
Defines the value that corresponds to the maximum input frequency defined by parameter
F MAX. See parameter
-32768...32768
12.17 DIO2 F MIN SCALE
Defines the value that corresponds to the minimum input frequency defined by parameter
F MIN. See parameter
-32768...32768
Parameters and firmware blocks
FW block:
DI status inversion mask.
FW block:
12.14...12.17 as follows:
12.15 12.14
DIO2 maximum frequency.
FW block:
12.14 DIO2 F MAX
DIO2 minimum frequency.
FW block:
12.14 DIO2 F
Scaled value corresponding to DIO2 maximum frequency.
FW block:
12.14 DIO2 F
Scaled value corresponding to DIO2 minimum frequency.
DI (see above)
2.01 DI STATUS. For example, a value of 0b000100
DIO2 (see above)
12.02 DIO2 CONF
f (Hz)
DIO2
DIO2 (see above)
12.02 DIO2 CONF
DIO2 (see above)
MAX.
DIO2 (see above)
MAX.
is set to (2) Freq input.
(2.10 DIO2 FREQ IN) by
is set to (2) Freq input. See
12.14 DIO2
12.15 DIO2