Loading The Sequence From The Unit Detail Display - ABB 800xA Operation

Section 4 TCL Displays
The information shown in the main portion of the display for each sequence in the
unit includes:
Sequence ID
Sequence Type
Sequence State
Sequence Mode
Sequence Status
Step Text
Each column width can be adjusted by clicking on the title border and sliding the
width indicator left or right.

Loading the Sequence from the Unit Detail Display

Note the ID of the sequence you want to download (refer to your AdvaBuild
documentation). Access the Unit Detail Display of the unit where the sequence is to
be downloaded.
To load a sequence onto a unit:
1.
2.
3.
Wait while the system downloads the sequence to the unit. The message
is displayed while the system downloads the sequence. When downloading is
complete, the sequence and its related data are shown in the list of sequences. The
initial state of a just-downloaded sequence is inactive.
3BUR002418-600 A
Sequence program name.
Schedule, Procedure, or Operation.
Active, Inactive, Paused, Loading.
Auto, Manual, Semi_Auto.
Normal, Abnormal 1 - 16.
Current step in active sequence or if inactive, step executed
when sequence became inactive.
Select the Sequence Load Request field
Enter the ID for the desired sequence (optionally, you may load the sequence to
a slave unit by entering, SLAVE after the Sequence ID)
Press ENTER
Loading Sequence sequence name
Loading the Sequence from the Unit Detail Display
81