ABB 800xA Operation page 143

Section 6 Status Displays
EMPHASIS SOURCE The emphasis source determines whether the set of
messages for the current device/subdevice (SUBDEVICE), subsystem
(SUBSYSTEM), or archive file (ARCHIVE) are displayed or highlighted. To
change the emphasis source, use the pull-down menu to select either the
SUBDEVICE, SUBSYSTEM, and ARCHIVE source. The messages displayed or
highlighted are further specified by the archive disk described below.
DISK NAME The disk identified in this field is the previously recorded archive
disk from which messages are being viewed. To change the archive disk, use the
pull-down menu to select either the available disk from which you want to view
messages. If an archive other than WC00 (the configurator disk) is selected, current
messages from the selected subdevice are not shown to avoid confusion between
recent messages on this system and previously archived messages from this or
another system.
The EMPHASIS MODE and EMPHASIS SOURCE fields together select six
possible ways to view messages. The effects are summarized below:
MODE
SHOWING
ONLY
SHOWING
ONLY
SHOWING
ONLY
HIGH-
LIGHTING
HIGH-
LIGHTING
HIGH-
LIGHTING
3BUR002418-600 A
SOURCE
SUB- Displays current (if the disk is WC00) and archived
DEVICE messages from the selected device/subdevice. The
messages shown 'are the same as those shown in the
default MESSAGES mode.
SUB- Displays archived messages from all subdevices of the
SYSTEM selected device, highlighting messages from the
selected subdevice.
ARCHIVE Displays archived messages from any device. The
messages shown are the same as those shown in the
ARCHIVE mode.
SUB- Displays archived messages from any device,
DEVICE highlighting those from the selected device/subdevice.
SUB- Displays archived messages from any device, high-
SYSTEM lighting those from any subdevice of the selected device.
ARCHIVE Displays current and archived messages from the
selected device/subdevice, highlighting archived
messages.
Diagnostic Message Display
EFFECT
143