Di820 - ABB 800xA Operation

Appendix A Runtime Templates
MONITOR POWER
To monitor process power source enter a YES;
if not needed enter a NO.
Default Value is NO.
POSITION
Enter a number from 1 to 12 representing the position of the I/O module relative to
the FCI. The I/O module directly next to the FCI is number 1.
Default value is 1.
REPORT FAULTS 01 through 16
If channel faults are to be reported, enter a YES;
if not enter a NO.
The default value is YES.
RESERVED OPTIONS
This field reserved for future use. A zero (0) should be entered as a default value.
VALUE CYCLE TIME
Enter the channel value update period (msec) over the fieldbus. Refer to S800 I/O
User's Guide for details of AF 100 loading in relation to cycle time.
The valid values are:
1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048 and 4096.
The default value is 128.

DI820

ACTIVE 01 through 08
If the channel is to be active enter a YES.
If the channel will not be used enter a NO.
3BUR002418-600 A
DI820
305