Appendix A Runtime Templates
BRKPTS
The Breakpoint Sets (BRKPTS) object is a child of CCF object. One BRKPTS
object is required for each breakpoint set being defined for the system. See
Version of Breakpoint Sets Templet
NAME OF SET
The NAME OF SET field specifies the name of the linearization table used when
referencing the breakpoint set.
Valid entry is a string of up to 4 ASCII characters.
Default is: blank spaces
X VALUE
The X VALUE field specifies the x value for one of up to 11 x, y pairs for the
breakpoint table.
Valid entry is a floating point number.
Y VALUE
The Y VALUE field specifies the y value for one of up to 11 x, y pairs for the
breakpoint table.
Valid entry is a floating point number.
3BUR002418-600 A
on page 57.
BRKPTS
Runtime
319