ABB 800xA Operation page 150

S800 LAN Display
AF100 INTERFACE - X Menu
Each AF100 Interface status area contains an AF 100 INTERFACE - X menu
button. When the AF100 INTERFACE - x button is selected, a menu is displayed
with the items shown in
Figure 67. AF 100 INTERFACE - X menus
State
RPT Faults
Get
Diagnostics
S800 Station Detail
In the main section of the display, a detail window shows specific information about
each I/O Station. The right scroll bar is used to view other stations on the LAN. The
display is arranged in a 10 by 8 grid for all stations (1 - 80). Stations not configured
are not shown. Station 80 being in the lower right corner can be seen by scrolling the
window to that area of the grid. For each I/O Station, information is displayed as
described below.
150
Figure 67 and as explained below.
User can change state to:
RESTART re-initializes the lan,
DEACTIVATE forces all data qualities to 'bad',
ACTIVATE sets data qualities based on the active status.
SWITCHOVER switches to a backup interface if present.
User can select to change reporting method: Flash Notify, Silent
Notify or No Notify.
Select this to get the diagnostics dialog,
Section 7 I/O Displays
Figure 68.
3BUR002418-600 A