Suzuki Baleno Manual page 249

3E-26 REAR SUSPENSION (2WD VEHICLE)
1. Inner nut
2. Inner bolt (cam bolt) 3. No.2 control rod
ADJUSTMENT
1) Loosen right and left No.2 control rod inner nuts.
2) Adjust toe to satisfy specification by turning right and left No.2
control rod inner bolts (cam bolts) by the same amount.
3) After adjustment, tighten right and left nuts to specified torque
while holding cam bolt with another wrench to prevent it from
turning.
Tightening Torque
(a): 90 N·m (9.0 kg-m, 65.0 lb-ft)
4) Install suspension frame cap.