8.3.3 Configuring DP-V1 Settings for a Slave
Whether or not a slave device supports DP-V1 functions is indicated in the GSD file provided by the
vendor of that device. For devices that do provide DP-V1 functions, support is disabled by default.
➢ To enable DP-V1:
1. From the Project Navigator, right-click the Slave and select Properties.
2. In the Properties window, click the ellipsis (...) in the DPV1 Settings field. The PROFIBUS DPV1
Setup dialog box displays.
GFK-2958E
RSTi-EP User Manual
Chapter 8 Commissioning
353