Table of Contents
Advertisement
Chapter 8 Commissioning
Process Alarm, Diagnostic Alarm:
User can select the process alarm, diagnostic alarm to be enabled or disabled. By default they are
disabled.
Type of Diagnostic:
The Type of diagnostic can be selected either "Extended Channel diagnostic" or " Vendor Specific
diagnostic".
Behavior of Outputs on Filed Bus Error:
The behavior of the outputs can be set to all outputs to go off, set to substitute value or Hold last
state.
Module Behavior on Hot Swap:
When the user performs hot swap, user can either continue data exchange or can behavior like field
bus error.
Data Format:
Use can select either Motorola or Intel data format. By default iti s Motorola.
Lock Force Mode:
User can enable the force of outputs while the slave is communicating with the master or can lock
the force mode so that the outputs can not be forced.
PROFINET Scanner Parameters (GSDML Tab)
The EPXPNS001 module's GSDML tab displays the information from its GSDML file.
This information cannot be edited.
GFK-2958E
RSTi-EP User Manual
346
Advertisement
Table of Contents
