Removing/Replacing The Plug-In Unit - GE RSTi-EP User Manual

Standalone 1ghz programmable controller

Hide thumbs Also See for RSTi-EP:

Table of Contents

10.1 Removing/Replacing the Plug-in Unit

All work on the RSTi-EP station must be carried out with the power supply

disconnected. Ensure that the place of installation (switch cabinet and

such) has been disconnected from the power supply.

The components in the RSTi-EP series can be destroyed by electrostatic

discharge. Ensure that personnel and work equipment are adequately

➢ To remove/replace the plug-in unit

1. Unlock the connector frame.

2. Swivel the plug-in unit with the cabling towards the front by 90°.

Replacing Components

Explosion Risk - Prior to starting work, ensure that there is not a

potentially explosive atmosphere.

RSTi-EP User Manual November 2017