I/O Modules - GE RSTi-EP User Manual

12.2 I/O Modules

Module
Digital Input Modules
EP-1214, EP-1218, Status
EP-1318, EP-125F,
EP-12F4, EP-1804
Digital Output Modules
EP-2214, EP-2614, Status
EP-2634, EP-2218,
EP-225F
Digital Relay Output Modules
Status
EP-2714, EP-2814
Digital Counter, SSI and Serial Communication Modules
EP-5111, EP-5112, Status
EP-5212, EP-5261,
EP-5311
Pulse-width Modulation Modules
EP-5422, EP-5442 Status
GFK-2958E
4.2 Red: Supply voltage for output
current path < 18 V DC
4.4 Red: Internal fuse defective
LED Status
Red:
LED
– Error in supply voltage at input
current path
– Communication error on the
system bus
– There is a new diagnostic
message
Red:
LED
– Error in supply voltage at output
current path
– Communication error on the
system bus
– There is a new diagnostic
message
– At least one output overloaded
Red:
LED
– Error in supply voltage at output
current path
– Communication error on the
system bus
– There is a new diagnostic
message
Red:
LED
– Error in supply voltage at input
current path
– Communication error on the
system bus
– There is a new diagnostic
message
Red:
LED
– Error in supply voltage at output
current path
– Communication error on the
system bus
– There is a new diagnostic
message
RSTi-EP User Manual
Chapter 12 LED Indicators and Troubleshooting
Check the supply voltage
Replace the network adapter
Recommended action
– Check that the module has been snapped
into place properly
– Check the supply voltage
– Check that the module has been snapped
into place properly
– Check the supply voltage
– Eliminate the overload/short-circuit
– Check that the module has been snapped
into place properly
– Check the supply voltage
– Check that the module has been snapped
into place properly
– Check the supply voltage
– Check that the module has been snapped
into place properly
– Check the supply voltage
– Eliminate the overload/short-circuit
403