Installation; Dip Switch Settings - GE KTD-400 User Manual

Installation

To install a KTD-400 keypad, you will need to set the DIP switches, mount the unit (KTD-300R only), and
wire the device.
CAUTION: Do not connect power to the unit before all installation steps have been completed. Do not connect directly to
a telecommunication network.

DIP switch settings

Use Table 1 to select your mode of operation.
Table 1. DIP switch settings
Setting Binary
1000
0100
1100
0000
Figure 3 shows how to open the KTD-400 and KTD-300R and locate the DIP switches.
Figure 3. DIP switch locations for KTD-400 and KTD-300R models
KTD-400
Description
Digiplex PTZ and VCR control only.
Controlling a robot MV96 multiplexer with a KTD-93.
Digiplex PTZ, multiplexer, and VCR control (factory setting).
Controlling a robot MV96 multiplexer with a KTD-93.
4-position
DIP switch
KTD-300R
3