Figure 3-19 Roles Dialog Box - ABB XSeries G4 6200 User Manual

a No Access | Read Only | Read/Write option. If an existing role definition does not
provide the proper capabilities, a new one can be created by clicking the Browse
button next to the Role drop-down list. This brings up the Roles dialog box (see
Figure 3–19).
3.4.3.2
Default roles are automatically installed with PCCU32. These default roles are as
follows:
-
-
-
-
-
The Administrator role has the highest level access rights to all functions. Expert,
Advanced and Basic roles have decreasing levels of access rights.
The File Admin role has access rights of the Basic role plus minimum rights
required for sending/reading RBAC security files to and from G4 devices.
3.4.3.3
The following instructions will walk the user through the steps for creating a new
role.
1) Select the row that has the corresponding access level that the user wants.
2) A dialog box displays and asks for the name of the new role. Assign a name
3) Modify the access levels to complete the modification of the created role:
3.4.3.4
When adding a new user, the default role is the one that is currently displayed in
the Role drop-down list at the time the Add User button is clicked. The following
dialog box displays to set the user name and password (see Figure 3–20).
2104349 rev. AD
Figure 3–19 Roles dialog box
Role definition
Administrator
Expert
Advanced
Basic
File Admin
Role creation
Upon location, click the Copy button.
to the role. The new role is then available in the Roles dialog box.
- To change the name of an existing role, select the cell, and click the
Rename button.
- To delete an existing role, click the Delete button.
- The Default button resets the Role list to the factory defaults.
User configuration
Page 3–19