Station Id; Location; Security System; Device Legacy Bi-Level Security - ABB XSeries G4 6200 User Manual

Description
Date
Time

3.3.2 Station ID

The station identifier code should uniquely identify one G4 EX from that of any
others.
Description
Station ID

3.3.3 Location

The location field can hold up to 24 alphanumeric characters to describe its
location. An example would be the lease name, county name or road number.
Description
Station ID
3.4

Security system

Data and configuration security in the G4 EX is spread across three elements: the
flow meter, PCCU32 and WinCCU32. Currently, there are three types of security
that are possible:
-
-
-
The following sections will cover these security options.

3.4.1 Device legacy bi-level security

The G4 EX has a security switch (S2) on the termination board. Password security
is bi-level: read only (security code level 1) or read/write (security code level 2). To
establish meter security, the user must have the security switch in the OFF
position, and locally connect with PCCU32. Enter a four digit number level 1 and
level 2 security code, and click Send.
3.4.1.1
To establish a meter security, the user must have the security switch in the OFF
position, and locally connect with PCCU32.
1) Enter a four digit number for level 1 and level 2 security codes (see Figure
2) Turning the security switch (S2) ON will activate the security codes.
Page 3–14
Format
MM/DD/YY
HH:MM:SS
Format
XXXXXXXXXX
Format
XXXXXXXXXXXXXXXXXXXXXXXX
There are additional fields stored in WinCCU for uniquely
identifying the meter, including fields for entering the lease
holder, producer, operator and buyer. These fields reside on
the host computer in the ID Manager not in the G4 EX.
Device enforced legacy level 1-2 security
WinCCU enforced legacy security
Device and PCCU32 enforced Role Based Access Control (RBAC) security
Establishing meter security
3–14), and click Send.
Note
Must enter 2 digits each
24-hour clock
Note
10-digit alphanumeric
Note
24-digit alphanumeric
2104349 rev. AD