Enclosure - ABB XSeries G4 6200 User Manual

1.2.1 Enclosure

The custom-designed, explosion-proof enclosure consists of a cylinder shaped,
cast aluminum housing, powder coated, with front and rear end caps for access to
internal components (see Figure 1–3 through Figure 1–5). This enclosure may be
direct mounted, pipe mounted on the meter run using a pipe saddle or mounted on
a standalone pipe.
The enclosure features three (3) exterior hubs for wiring:
-
-
-
The end caps have precision engineered threading and are susceptible to damage
if treated roughly. End caps are water tight, corrosion resistant and NEMA 4X
rated. Unauthorized removal of the end caps are protected with a 1/16"
countersunk hex head set screw on each end cap.
1.2.1.1
Unit
US
Metric
1.2.1.2
Unit
US
Metric
Page 1–8
Communication and power
Resistive temperature detector (RTD)
Input/output wires
Remove power from the device, or insure the area is known to be
non-hazardous before removing any enclosure cover. For further
information, refer to the certification drawing indicated on the
device's nametag and national and local electrical codes.
Do not attempt to loosen the end cap before loosening the set
screw. Doing so may damage threads on the unit.
Dimensions
Width
w/o External
PCCU
7.87"
199.90 mm
Installation and weight
Weight
15.65 lbs.
5.84 kg
Height
w/ External
PCCU
9.50" 11.25"
241.30 mm 285.75 mm
W/ EX PCCU Pipe Mounted
Connector Depth
9.69"
16.35 lbs.
6.10 kg 246.13 mm
Depth
8.34"
211.84 mm
Direct Mounted
Depth
8.34"
211.84 mm
2104349 rev. AD