3.2.4.2
1) Connect locally using either the RS-232 instructions or the USB instructions
2) In PCCU32 Entry mode, select Communications from the tree-view (see
3) In the Network tab, set the Enable DHCP parameter field value to No. Click
2104349 rev. AD
-
Point to the specific network address (XFC-148).
-
String the enter address together: C:\PCCU605\pccu32.exe TCP:XFC-
148.
Figure 3–11 Windows desktop Shortcut dialog box
Method Two
covered in the previous section(s).
Figure 3–12). Upon selection, click on the Network tab.
the Send button. The remaining parameter fields within the Network tab will
auto-populate.
Page 3–11