Step-By-Step Instructions; Restoring Configuration Files; Step-By-Step Instruction; Performing A Warm Boot - ABB XSeries G4 6200 User Manual

When using this utility to back up files, the user should also download the files to
the tfCold drive in the event of a cold start.

4.2.1 Step-by-step instructions

1) Collect the data from the unit.
2) While in PCCU32, click the Save and Restore Utility icon in the main
3) When the Save and Restore window displays, click the Save Station Files
4) When the Save Station Files dialog box displays, verify the default name
5) When finished saving the station files, a new dialog box offers the user the
4.3

Restoring Configuration Files

The Restore function enables the user to download configuration files to the G4
EX.
If prior to performing maintenance the Save Configuration Files was used, these
files were downloaded to the laptop's hard drive or disk. The Restore function
downloads these files into the G4 EX's tfCold drive. This safeguards the data and
allows the user to restart the unit without the obstacle of reconfiguring the G4 EX
should any problem arise.

4.3.1 Step-by-Step Instruction

1) While the user is in PCCU32, click the Save and Restore Utility icon on the
2) When the Save and Restore window displays, click the Restore Station
3) When the Restore Station Files dialog box displays, verify the default name
4) Verify that the unit is functioning properly.
4.4

Performing a Warm Boot

A warm boot signifies that the user has cycled power off the board without
disconnecting the lithium battery. This method enables the user to not lose any
stored data. A warm boot can be initiated from a hardware or software standpoint.
The following will take the user through the steps for both methods.

4.4.1 Hardware Warm Boot

There are two methods of warm booting the system from a hardware standpoint:
4.4.1.1
1) The user will need to open the door to the unit. Locate the Reset button on
Page 4–2
window toolbar.
button. The Save Station Files dialog box will display.
and path for the files. Click the OK button. This will save the tfData drive
files.
option to Restore the Station Files to the tfCold drive. If the user selects
Yes, the station files will be downloaded to the tfCold drive.
window's main toolbar.
Files button. The Restore Station Files dialog box will display.
and file path. Click the OK button. This will restore the files to the tfCold
drive.
Method 1
the G4 EX termination board.
2104349 rev. AD