Connection - ABB PSTX30 Installation And Commissioning Manual

This chapter contains instructions on how to receive the
softstarter and how to mount it in a proper way.
WARNING
If you do not obey these instructions, it can cause
the softstarter to become overheated or not operate
correctly.
4.1 Receive, unpack and check
WARNING
Do not lift the softstarter by the connection bars,
as this can damage the softstarter.
4
WARNING
Risk of damage to property. Make sure that no
liquids, dust or conductive parts can go into the
softstarter.
• Check that the package is placed with the correct side
up, see Figure 13.
• Remove the transport casing.
• Check that the order code corresponds with the
delivery documents.
• Check that all items are included, according to the
delivery note. See Table 1 Delivery note.
• Check the softstarter as well as the packaging. In case
of damages, please contact the transport company or
the ABB reseller/Office immediately.
• Until the softstarter is mounted it should be stored in
its packaging.
Table 1
Delivery note
Softstarter Items included with the softstarter
type
PSTX30...105 •
•
PSTX142...170 •
•
•
PSTX210...370 •
•
•
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
1SFB262001D1000 – HMI Mounting Kit
1SFC132082M9901 – PSTX Short Form Manual
1SFB262001D1000 – HMI Mounting Kit
1SFC132082M9901 – PSTX Short Form Manual
1SFA899221R1002 – Terminal Kit # PSLE-185
1SFB262001D1000 – HMI Mounting Kit
1SFC132082M9901 – PSTX Short Form Manual
1SFA899221R1003 – Terminal Kit # PSLE-300
13
Figure 13: Receiving, unpacking and checking