ABB PSTX30 Installation And Commissioning Manual page 57

6.4.2 Assistants
Path in menu:
Menu Assistants
u
For navigation, see Figure 63.
For more detailes on how to set Basic set-up and
Application set-up, see chapter 2 Quick start.
For more information about Assistants and Application list,
see chapter 7.21 Assistants.
The Assistants menu contains predefined settings and
parameters. This should be used if an easy and quick
setup is required. Only a few parameters have to be set
before a start of the motor is possible. All necessary input
data will show up in an automatic loop. The Assistants
menu is divided in:
• Basic set-up
• Application set-up
After selecting an application and performing the
desired setting, the application should not be
selected again. If this is done, all the settings will
be reset to the default settings for the selected
application.
Enter the Assistants menu
Find the Assistants menu by pressing
select Assistants with the Navigation keys.
Press "Select" to enter the Assistants menu.
Basic set-up
Use the Navigation keys to select Basic set-up.
Press "Select" to enter the Basic set-up.
The Basic set-up menu is divided in 5 steps:
Language, Date and time, Motor data, System
configuration and Setup complete.
Application set-up
The Application set-up are quick settings for Applications,
Values and Tune settings.
Use the Navigation keys to select Application set-up.
Press "Select" to enter the Application set-up.
Select what type of application the softstarter is used for
by pressing "Select".
See Figure 62.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
MENU
Parameters
Assistants
Motor jog
Event log
Backup handling
System info
Settings
Figure 63: Assistants navigation.
"Menu" and
62
Figure 62: Application set-up.
Basic set-up
Application set-up
Local PSTX
Application set-up
Band saw
Bow thruster
Centrifugal pump
Circular saw
Conveyor belt short
Done 12:00
6
1(4)
Select