ABB PSTX30 Installation And Commissioning Manual page 114

7.19 Settings
The settings menu contains softstarter set-up parameters.
• Language
• Date & Time
• Display settings (for HMI)
• Reset from defaults
For settings and navigation, see chapter 6.4.6 Human
Machine Interface (HMI).
7.20 Assistants
The Assistants menu contains of predefined settings and
parameters. This is should be used if an easy and quick
setup is required. Only a few parameters have to be set
before start of the motor is possible. All necessary input
data will show up in an automatic loop. The Assistants
menu is divided in:
• Basic set-up
7
• Application set-up
After selecting an application and performing
the desired tuning, the application should not be
selected again. If this is done, all the tuning will
be reset to the default settings for the selected
application.
Enter the Assistants menu
Find the Assistants menu by pressing right Selection
softkey "Menu" and select Assistants with the Navigation
keypad. Press the right Selection softkey "Select" to enter
the Assistants menu.
Basic set-up
The Basic set-up menu is divided in 5 steps:
Language, Date and time, Motor data and System
configuration.
Application set-up
The Application set-up i quick settings for Applications,
Values and Tune settings. Select what type of application
the softstarter is used for by pressing right Selection
softkey "Select".
For more detailes in how to set Basic set-up and
Application set-up see chapter 2 Quickstart.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com