ABB PSTX30 Installation And Commissioning Manual page 109

Heat sink over temperature
7.17.1.5
The sofstarter measures the heat sink temperature. If
the temperature gets to high this fault is signaled. The
purpose of the heat sink is to cool the thyristors.
Heat sink over temperature fault is configured with the
following parameters:
Parameter
25.09 Heat sink over temp out
25.10 Heat sink over temp op
Unspecified fault
7.17.1.6
This fault is a grouping of several internal faults that are
quite unlikely and does not need to specified as individual
faults.
Unspecified fault is configured with the following
parameters:
Parameter
25.11 Unspecified fault out
25.12 Unspecified fault op
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Description
Specifies the Event groups this
fault belongs to.
Sets the operation of this fault.
Description
Specifies the Event groups this
fault belongs to.
Set the operation of this fault.
Setting range Default value
Eventgroup 0 ... 6 1
Stop manual, Stop Stop manual
auto
Setting range Default value
Eventgroup 0 .. 6 1
Stop manual, Stop Stop manual
auto
7