ABB PSTX30 Installation And Commissioning Manual page 63

Reset to defaults
6.4.6.4
Path in menu:
Menu Settings Reset to defaults
u u
For navigation, see Figure 76.
The Reset to defaults menu is used to reset home view
layout, parameters or operating data back to factory
default settings.
The control supply voltage should be disconnected and
reconnected. The real time clock, the hour run meter, the
number of starts and the presentation language will not be
affected by the reset
1. Press "Select" to enter the Reset to defaults
menu.
2. Use the Navigation keys to select between;
Home view layout
Parameters
Operating data
3. Press "Select" to select the data which is to be
reset.
4. Press "Yes" to reset, or press
cancel.
Confirmation of reset will be displayed as "Done" on the
display.
Reset operating data
Reset operating data is divided in:
• Active energy
• Rective energy
• Number of starts
• Motor run time
• Thyristor run time
Use the Navigation keys to select which data to reset.
Press "Reset" to reset, or press
to Reset to defaults menu.
Confirmation of reset will be displayed as "Done" on the
display.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Parameters
Assistants
Motor jog
Event log
Backup handling
System info
Settings
Figure 76: Reset to defaults.
"No" to
"Back" to return
Settings
MENU
Language
Date & time
Display settings
Reset from defaults
Reset from defaults
Reset home view layout
6