GE VersaMax PLC User Manual page 84

Parameters
Status Length
Network Time Servers
84 GFK-1503E
For public disclosure
Description
This value is automatically set to either 80 bits (for %I and %Q Status
address locations) or 5 words (for %R, %AI, and %AQ Status
address locations).
IP addresses of up to 3 NTP time servers used to synchronize
timestamps in produced Ethernet Global Data exchanges. If no NTP
time servers are configured here, the Ethernet interface is initialized
from the clock in the CPU instead. Refer to the section,
Timestamping of Ethernet Global Data Exchanges
more information. (This feature is supported in IC200CPUE05-HK
and previous versions only.)
in chapter 13 for
VersaMax PLC User Manual