ABB i-bus KNX Product Manual page 74

®
ABB i-bus KNX
Commissioning
28
The group object is enabled if the Switching bit or scene parameter is set to Scene in the Light – Threshold 2 parameter
window.
The object sends the value parameterized for exceeding the threshold when the threshold is exceeded and the value
parameterized for falling below the threshold when the threshold is fallen below.
Telegram value:
29
The group object is enabled if the Switching bit or scene parameter is set to Scene in the Temperature – Temperature control
parameter window.
The object sends the value parameterized for exceeding the threshold when the setpoint temperature is exceeded and the
value parameterized for falling below the threshold when the setpoint temperature is fallen below.
Telegram value:
30
The group object is enabled if the Switching bit or scene parameter is set to Scene in the Time switch Astro Plus – Settings
parameter window.
The object sends its value depending on the set application function for sending on the KNX bus on brightness or darkness.
The object value depends on the Time switch Astro Plus application parameter.
Telegram value:
31
The group object is enabled if the Switching bit or scene parameter is set to Scene in the Time switch Astro – Settings
parameter window.
The object sends its value depending on the set application function for sending on the KNX bus on brightness or darkness.
The object value depends on the Time switch Astro application parameter.
Telegram value:
72 2CDC509082D0201 | TR/A 1.1
Sending
0...64 = Scene number
Sending
0...64 = Scene number
Sending
0...64 = Scene number
Sending
0...64 = Scene number
Sends scene light
above/below threshold 2 –
Sending
Sends scene temperature
above/below setpoint
temperature – Sending
Sends Astro Plus scene –
Sending
Sends Astro scene – Sending 1-bit
1-bit C, T
DPT 17.001
1-bit C, T
DPT 17.001
1-bit C, T
DPT 17.001
C, T
DPT 17.001