ABB i-bus KNX Product Manual page 25

®
ABB i-bus KNX
Commissioning
The following parameter appears with the option Receiver (internal):
Send GPS coordinates
Options: Never
On request
On request and automatically/cyclically
•
Never: Sending on the bus is deactivated.
•
On request: The 1-bit object Bus request to send GPS coordinates – Reception is activated.
When the "On" value is received on this object, the GPS coordinates are sent on the bus via
the corresponding objects.
•
On request and automatically/cyclically: The 1-bit object Bus request to send GPS coordinates
– Reception is activated. When the "On" value is received on this object, the GPS coordinates
are sent on the bus via the corresponding objects. The dependent parameter Cycle interval for
coordinates is additionally activated.
Cycle interval for coordinates
Options: Every 30 seconds
Every minute
Every hour
Every 6 hours
Every 12 hours
At midnight
At 00:02
Depending on the selection, the GPS coordinates are correspondingly sent cyclically on the bus.
TR/A 1.1 | 2CDC509082D0201 23