ABB i-bus KNX Product Manual page 27

®
ABB i-bus KNX
Commissioning
Send sun azimuth and elevation
Options:
This parameter can be used to decide when the current position of the sun (azimuth and elevation) is to be sent
on the bus.
•
Never: Sending on the bus is deactivated.
•
On request: The 1-bit object Bus request to send sun angles – Reception is activated. When the "On" value is
received on this object, the sun azimuth and elevation are sent on the bus via the corresponding objects.
•
On request and automatically/cyclically: The 1-bit object Bus request to send sun angles – Reception is
activated. When the "On" value is received on this object, the sun azimuth and elevation are sent on the bus
via the corresponding objects. The dependent parameter Cycle interval for coordinates is additionally
activated.
Never
On request
On request and automatically/cyclically
Cycle interval for azimuth and elevation
Options: Every 30 seconds
Every minute
Every hour
Every 6 hours
Every 12 hours
At midnight
At 00:02
Depending on the selection, the sun azimuth and elevation are correspondingly sent cyclically on
the bus.
TR/A 1.1 | 2CDC509082D0201 25