ABB i-bus KNX Product Manual page 76

®
ABB i-bus KNX
Commissioning
37
The group object is enabled if the Light control depending on internal measurement or external bus value parameter is set to
Bus (external) in the Light – Light control parameter window.
The object is used to send the brightness for light control to the device if it does not come from the internal sensor.
38
The group object is enabled if the Coordinates by receiver or bus value parameter is set to Bus (external) in the GPS
coordinates and sun data – GPS-coordinates parameter window.
The object is used to send the latitude for calculating the sun position to the device if it does not come from the internal
sensor.
39
The group object is enabled if the Coordinates by receiver or bus value parameter is set to Bus (external) in the GPS
coordinates and sun data – GPS-coordinates parameter window.
The object is used to send the longitude for calculating the sun position to the device if it does not come from the internal
sensor.
40
The group object is enabled if the Activate block object parameter is set to Yes in the Light – Light control: Threshold 1
parameter window.
The threshold 1 function can be blocked with this object. Triggering of the block depends on the parameter Evaluation of the
blocking object and the option Block on 1 or Block on 0 selected here.
Telegram value:
41
The group object is enabled if the Activate block object parameter is set to Yes in the Light – Light control: Threshold 2
parameter window.
The threshold 2 function can be blocked with this object. Triggering of the block depends on the parameter Evaluation of the
blocking object and the option Block on 1 or Block on 0 selected here.
Telegram value:
42
The group object is enabled if the Activate block object parameter is set to Yes in the Temperature – Temperature control
parameter window.
The temperature control function can be blocked with this object. Triggering of the block depends on the parameter Evaluation
of the blocking object and the option Block on 1 or Block on 0 selected here.
Telegram value:
74 2CDC509082D0201 | TR/A 1.1
Reception
Reception
Reception
Reception
0 = enable/block
1 = block/enable
Reception
0 = enable/block
1 = block/enable
Reception
0 = enable/block
1 = block/enable
Receives light value (lux)
from bus – Reception
Receives latitude from bus –
Reception
Receives longitude from bus
– Reception
Light control blocking object
threshold 1 – Reception
Light control blocking object
threshold 2 – Reception
Temperature control blocking
object – Reception
1-byte C, W
DPT 9.004
4-byte C, W
DPT 14.007
4-byte C, W
DPT 14.007
1-bit C, W
DPT 1.003
1-bit C, W
DPT 1.003
1-bit C, W
DPT 1.003