Parameter Window Light - Light Control - ABB i-bus KNX Product Manual

®
ABB i-bus KNX
Commissioning
Parameter window Light – Light control
The light control settings can be made in this parameter window.
Lux switching
Options:
This parameter is used to set whether light control is activated or deactivated.
•
•
42 2CDC509082D0201 | TR/A 1.1
Inactive
Active
Inactive: Light control is deactivated.
Active: Light control is activated. The dependent parameters
Light control depending on internal measurement or external bus value
o
Lux logic
o
Threshold 2
o
Extra time switch
o
and the dependent Threshold 1 parameter page are displayed.