®
ABB i-bus
KNX
General
1
General
The Time Receiver GPS serves as the internal clock for each KNX installation. Installed on a building's
facade, it receives the time signal via the globally available GPS satellite system. As an atomic clock in
each satellite continuously transmits the UTC time (Greenwich Mean Time), this time can be received
anywhere in the world. If the time zone is known, the current local time can be sent into the KNX system at
any time.
1.1
Using the product manual
This manual provides detailed technical information relating to the function, installation and programming
of the ABB i-bus
This manual is divided into the following chapters:
Chapter 1
Chapter 2
Chapter 3
Chapter 4
Chapter A
®
KNX Time Receiver GPS TR/A 1.1. The device is explained using examples.
General
Device technology
Commissioning
Planning and application
Appendix
TR/A 1.1 | 2CDC509082D0201 3