Group Objects; Summary Of Group Objects - ABB i-bus KNX Product Manual

®
ABB i-bus KNX
Commissioning
3.3

Group objects

Note
As standard, the write flag (with the exception of 1-bit group objects) is deleted with the group object
values. Thus the group object value cannot be changed via the bus. If this function is required, the write
flag must be set in ETS.
The group object value is overwritten with the parameterized value after bus voltage recovery.

Summary of group objects

GO No. Function
0 Sending
1 Sending
2 Not assigned
3 Reception
4 Sending
5 Sending
6 Sending
7 Sending
8 Reception
9 Sending
10 Sending
11, 12 Not assigned
13 Sending
14 Sending
15 Reception
16 Sending
17 Sending
18 Reception
19 Sending
20 Sending
64 2CDC509082D0201 | TR/A 1.1
Name
Sends the current date on the bus
Sends the current time on the bus
Bus request to send date and time
Sends the state of the TR/A 1.1
Sends DST change announcement
Sends the longitude on the bus
Sends the latitude on the bus
Bus request to send GPS coordinates
Sends sun azimuth
Sends sun azimuth
Sends sun elevation, 4-byte
Sends sun elevation, 2-byte
Bus request to send sun angles
Sends the sunrise time on the bus
Sends the sunset time on the bus
Bus request to send sun times
Sends the temperature on the bus
Sends the light value on the bus
Data Point
Length
Type (DPT)
11.001 3 bytes
10.001 3 bytes
1.017 1 bit
1.005 1 bit
1.00.2 1 bit
14.007 4 bytes
14.007 4 bytes
1.017 1 bit
14.007 4 bytes
9.xxx 2 bytes
14.007 4 bytes
9.xxx 2 bytes
1.017 1 bit
10.001 3 bytes
10.001 3 bytes
1.017 1 bit
9.001 2 bytes
9.004 2 bytes
Flags
C R W T U
x x
x x
x x
x x
x x
x x
x x
x x
x x
x x
x x
x x
x x
x x
x x
x x
x x
x x